Showing all 20 results
- Decorator Series Baseboard – (Full Enclosure)
-
Revital/Line
- Fuel: Oil Fired
- System: Hot Water
- Combustion: Atmospheric
- Capacity: 105-231 MBH
- Up to 87.0% AFUE
- For residential to light commercial requirements
- Robust triple pass cast-iron heat exchanger
- Direct Vent model available
- Installer-friendly features
- More BTU's per section than ordinary boilers
- Metal push nipple to connect individual sections
- 25 Year Limited Lifetime Warranty
- The Q3 is DOE 2021 compliant
-
Fine / Line 30
- Residential Hot Water
- Output: 580 Btuh/FT (180 deg. 1 GPM)
- Height: 7-7/8", Depth: 2-11/16" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Rust-resistent, galvanized steel enclosures with nu-white enamal finish maintains beauty
- Commercial grade material at residential cost
- Designed for single homes, apartments and renovations
- Optional swedged element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- Accommodates return line with short radius return bend
- Drawn steel end caps and wall trim provide a distinguished look
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Multi / Pak 80
- Res. and light comm.
- Hot Water or Steam
- 590 to 790 Btuh/FT (180 Deg. 1 GPM)
- Height: 8-7/8", Depth: 3-1/2"     Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Designed for single homes and renovations and light commercial applications
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 2" floor-to-front cover opening promotes good air circulation for effective convection heating
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Base / Line 2000
- Residential hot water
- Output: 570 Btuh/FT (180 Deg at 1 GPM)
- Height: 7-3/8", Depth: 2-11/16" Lengths: 2' - 10'
- Made in the USA by the leader in baseboard heating
- Designed for single homes, apartments and renovations
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting, makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Hydronic Floor Box
- Application: Floor Recessed
- Output: 3040 Btuh (H-3 element, 180 Deg. 1 GPM)
- Height: 8-9/16”  Length: 65"   Width: 6-3/16”
- A hefty steel grille withstands heavy traffic
- Grille removes easily for cleaning the floor box
- Grille offered painted in Nu-white or Galvanized
- Element sold separately or with box
- This is a test
-
The Kicker
- Application: Hot water
- Voltage: 120 VAC, 60 Hz.
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Range: 140 - 220 Btuh ˚F
- High performance manifold-type heat exchanger
- Two built-in air vent tappings. Coin or screwdriver access.
- Brazed tube joints resist rigors of installation and years of operation
- 1/2" hot water supply and return fittings
- Aluminum turbo fin heat exchanger maximizes heat transfer
- Expanded copper tube bonds fin to copper for high heat transfer
- Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
- Aluminum squirrel cage blower
- Aquastat permits blower operation only when the water temperature is above 130°F
- Three-position blower switch is easily accessible
- Hot dipped galvanized chassis resists rust and corrosion
- Rubber grommets cushion chassis for quiet operation
- 22" matte black grille
-
350 Series
- Application: 19 or 16-ga. steel front cover, 24-ga. back cover
- Heights: 9-7/8" (one tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Factory pre-assembled in individual cartons for rapid installations
- Interchangeable heating elements
- Room control damper optional
- Double-bent aluminum fins won’t loosen
- Expansion noises banished
- Super-strong, dent-proof, kick-proof front panel
- Stronger tubes for longer service
- Extra-strength steel brackets
- Finish: Nu-White (19 ga.); electro-gal.(16 ga.); choice of optional decorator colors
- Choice of five Slant/Fins H-Element
-
HD Series
- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
-
LC Series
- Material: 18-gauge galvanized steel
- Heights: 8.5" (one tier) & 14" (two tier)
- Depth: 3 1/2"
- Lengths: 2' to 8'
- Choose from Slant/Fin's 5 H-elements for various output requirements
- Wall brackets and Hangers sold separately
- Finish: Galvanized is standard. Custom color available.
- Lengths from 2' to 8'
- Telescopic cover accessories
-
Multi / Pak 90
- Material: 18-gauge galvanized steel
- Heights: 14" (one tier) & 21" (two tier)
- Depth: 5 1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
-
Multi / Pak 93
- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Lengths: 2' to 8'
- Depth: 3-1/2"
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Decorator colors available on special order.
- Lengths from 2' to 8'
- Elements: 4 copper and 1 steel element option
- Telescopic cover accessories
-
Multi / Pak 95
- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Depth: 5-1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional.
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
-
J Series
- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
-
R Series
- Material: 18, 16 & 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier) & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Flat Top Cover
- Up to 3 tiers for higher output
- Standard with Top Outlet; Front and Top/Front Outlet options
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 6 commercial copper or steel elements
-
RAG Series
- Material: 18, 16 & 14 ga.
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier) & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Flat Top Cover
- Up to 3 tiers for higher output
- Standard with Top Outlet; Front and Top/Front Outlet options
- Aluminum Grill Standard
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 6 commercial copper or steel elements
-
TBG Series
- Material: 16 or 14 ga.
- Heights: 17" (one tier) &    24" (two tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Slope Top and Slope Bottom Cover
- Up to 2 tiers for higher output
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
-
FS Series
- Material: FS-7: 18/16/14 ga.,
FS-14 & FS-21: 16/14 ga. - Heights: 11" (one tier), 18" (two tier) 25" (three tier)
- Depth: 5-1/2"
- Lengths: 2' to 8'
- Rugged floor mounted top outlet cover
- Up to 3 Tiers for higher output
- Aluminum Grill Option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
- Material: FS-7: 18/16/14 ga.,
-
F Series
- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
-
EM Series
- Material: 16 gauge, Expanded Metal Cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Expanded Metal Cover Hangs Directly on Heating Element
- Up to 3 tiers for higher output
- 16 Gauge Expanded Steel
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements