- Application: 16-gauge steel front cover, 20-gauge back panel
- Heights: 8-1/2″ (one tier) 14″ (one or two tier)
- Lengths: 2′ – 8′
- Depth: 3-1/2″
The extraordinary strength in materials and construction of HD Series baseboard makes it ideal for installation in sites where rugged treatment is anticipated. HD Series is especially recommended for multi-family housing, schools and institutions. Its compact size and high output make it suitable for a wide range of new and retrofit applications. Strength and durability reduce maintenance and extend the life of the installation Extraordinary strength for a low cost.
Related products
-
The Kicker
The Kicker- Application: Hot water
- Voltage: 120 VAC, 60 Hz.
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Range: 140 - 220 Btuh ˚F
- High performance manifold-type heat exchanger
- Two built-in air vent tappings. Coin or screwdriver access.
- Brazed tube joints resist rigors of installation and years of operation
- 1/2" hot water supply and return fittings
- Aluminum turbo fin heat exchanger maximizes heat transfer
- Expanded copper tube bonds fin to copper for high heat transfer
- Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
- Aluminum squirrel cage blower
- Aquastat permits blower operation only when the water temperature is above 130°F
- Three-position blower switch is easily accessible
- Hot dipped galvanized chassis resists rust and corrosion
- Rubber grommets cushion chassis for quiet operation
- 22" matte black grille
-
RAG Series
RAG Series- Material: 18, 16 & 14 ga.
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier) & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Flat Top Cover
- Up to 3 tiers for higher output
- Standard with Top Outlet; Front and Top/Front Outlet options
- Aluminum Grill Standard
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 6 commercial copper or steel elements
-
LC Series
LC Series- Material: 18-gauge galvanized steel
- Heights: 8.5" (one tier) & 14" (two tier)
- Depth: 3 1/2"
- Lengths: 2' to 8'
- Choose from Slant/Fin's 5 H-elements for various output requirements
- Wall brackets and Hangers sold separately
- Finish: Galvanized is standard. Custom color available.
- Lengths from 2' to 8'
- Telescopic cover accessories
-
F Series
F Series- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
