- Material: 18-gauge galvanized
- Heights: 8.5″ (one tier)
14″ (two tier) - Lengths: 2′ to 8′
- Depth: 3 1/2″
LC Series fin tube enclosures are functional and economical. Popular for light commercial installations such as schools and office buildings. The sloping louvered top is attractive and prevents use of the enclosure as a shelf or seat. Accessories are telescopic eliminating critical linear and vertical tolerances. All accessories snap into place without screws or other fasteners. Houses Slant/Fins commercial grade H elements.
Related products
-
Multi / Pak 90
Multi / Pak 90- Material: 18-gauge galvanized steel
- Heights: 14" (one tier) & 21" (two tier)
- Depth: 5 1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
-
J Series
J Series- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
-
The Kicker
The Kicker- Application: Hot water
- Voltage: 120 VAC, 60 Hz.
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Range: 140 - 220 Btuh ˚F
- High performance manifold-type heat exchanger
- Two built-in air vent tappings. Coin or screwdriver access.
- Brazed tube joints resist rigors of installation and years of operation
- 1/2" hot water supply and return fittings
- Aluminum turbo fin heat exchanger maximizes heat transfer
- Expanded copper tube bonds fin to copper for high heat transfer
- Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
- Aluminum squirrel cage blower
- Aquastat permits blower operation only when the water temperature is above 130°F
- Three-position blower switch is easily accessible
- Hot dipped galvanized chassis resists rust and corrosion
- Rubber grommets cushion chassis for quiet operation
- 22" matte black grille
-
HD Series
HD Series- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED