- Material: 16 or 14-ga. options
- Heights: 17″ (one tier) 24″ (one or two tier)
- Lengths: 2′ to 8′
- Depth: 5-1/4″
TBG Series is an attractive but rugged wall mounted hydronic radiation. Ideal for use in applications where radiation will be mounted high on the wall, such as in gymnasiums or corridors. Built to withstand use in high abuse areas such as gymnasiums. Extensive selection of decorator colors.
Related products
-
Multi / Pak 90
- Material: 18-gauge galvanized steel
- Heights: 14" (one tier) & 21" (two tier)
- Depth: 5 1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
-
Hydronic Floor Box
- Application: Floor Recessed
- Output: 3040 Btuh (H-3 element, 180 Deg. 1 GPM)
- Height: 8-9/16”  Length: 65"   Width: 6-3/16”
- A hefty steel grille withstands heavy traffic
- Grille removes easily for cleaning the floor box
- Grille offered painted in Nu-white or Galvanized
- Element sold separately or with box
- This is a test
-
F Series
- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
-
HD Series
- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
- Material: 16 or 14 ga.
- Heights: 17" (one tier) &    24" (two tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Slope Top and Slope Bottom Cover
- Up to 2 tiers for higher output
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
Slant/Fin baseboard provides gentle full room convection heating that blocks chilling drafts at the outside walls. Slant/Fin hot water baseboard heating surrounds your customers with heating comfort. Natural convection perimeter heating blocks chilling drafts at the outside walls where they originate. No annoying on-and-off blowing ducts. No dirt and germs blown through forced air system. Easy to zone for room by room comfort control. Ideal for use with high efficiency boilers.