- Material: 18-ga.cover
- Heights: 4-3/4″ (one tier) 11-3/4″ (one or two tier)
- Lengths: 2′ to 8′
- Depth: 4-3/8″
F Series is a rugged industrial grade cover that rests directly on the heating elements. Protects heating elements. An attractive cover for industrial and warehouse applications. Extensive selection of decorator colors.
Related products
-
Revital/Line
Revital/Line- Fuel: Oil Fired
- System: Hot Water
- Combustion: Atmospheric
- Capacity: 105-231 MBH
- Up to 87.0% AFUE
- For residential to light commercial requirements
- Robust triple pass cast-iron heat exchanger
- Direct Vent model available
- Installer-friendly features
- More BTU's per section than ordinary boilers
- Metal push nipple to connect individual sections
- 25 Year Limited Lifetime Warranty
- The Q3 is DOE 2021 compliant
-
J Series
J Series- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
-
HD Series
HD Series- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
-
TBG Series
TBG Series- Material: 16 or 14 ga.
- Heights: 17" (one tier) & 24" (two tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Slope Top and Slope Bottom Cover
- Up to 2 tiers for higher output
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED