- Material: 18-ga.cover
- Heights: 4-3/4″ (one tier) 11-3/4″ (one or two tier)
- Lengths: 2′ to 8′
- Depth: 4-3/8″
F Series is a rugged industrial grade cover that rests directly on the heating elements. Protects heating elements. An attractive cover for industrial and warehouse applications. Extensive selection of decorator colors.
Related products
-
FS Series
- Material: FS-7: 18/16/14 ga.,
FS-14 & FS-21: 16/14 ga. - Heights: 11" (one tier), 18" (two tier) 25" (three tier)
- Depth: 5-1/2"
- Lengths: 2' to 8'
- Rugged floor mounted top outlet cover
- Up to 3 Tiers for higher output
- Aluminum Grill Option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
- Material: FS-7: 18/16/14 ga.,
-
350 Series
- Application: 19 or 16-ga. steel front cover, 24-ga. back cover
- Heights: 9-7/8" (one tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Factory pre-assembled in individual cartons for rapid installations
- Interchangeable heating elements
- Room control damper optional
- Double-bent aluminum fins won’t loosen
- Expansion noises banished
- Super-strong, dent-proof, kick-proof front panel
- Stronger tubes for longer service
- Extra-strength steel brackets
- Finish: Nu-White (19 ga.); electro-gal.(16 ga.); choice of optional decorator colors
- Choice of five Slant/Fins H-Element
-
J Series
- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
-
Multi / Pak 80
- Res. and light comm.
- Hot Water or Steam
- 590 to 790 Btuh/FT (180 Deg. 1 GPM)
- Height: 8-7/8", Depth: 3-1/2"     Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Designed for single homes and renovations and light commercial applications
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 2" floor-to-front cover opening promotes good air circulation for effective convection heating
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
Slant/Fin baseboard provides gentle full room convection heating that blocks chilling drafts at the outside walls. Slant/Fin hot water baseboard heating surrounds your customers with heating comfort. Natural convection perimeter heating blocks chilling drafts at the outside walls where they originate. No annoying on-and-off blowing ducts. No dirt and germs blown through forced air system. Easy to zone for room by room comfort control.
Product Literature