- Application: 16-gauge steel front cover, 20-gauge back panel
- Heights: 8-1/2″ (one tier) 14″ (one or two tier)
- Lengths: 2′ – 8′
- Depth: 3-1/2″
The extraordinary strength in materials and construction of HD Series baseboard makes it ideal for installation in sites where rugged treatment is anticipated. HD Series is especially recommended for multi-family housing, schools and institutions. Its compact size and high output make it suitable for a wide range of new and retrofit applications. Strength and durability reduce maintenance and extend the life of the installation Extraordinary strength for a low cost.
Related products
-
350 Series
350 Series- Application: 19 or 16-ga. steel front cover, 24-ga. back cover
- Heights: 9-7/8" (one tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Factory pre-assembled in individual cartons for rapid installations
- Interchangeable heating elements
- Room control damper optional
- Double-bent aluminum fins won’t loosen
- Expansion noises banished
- Super-strong, dent-proof, kick-proof front panel
- Stronger tubes for longer service
- Extra-strength steel brackets
- Finish: Nu-White (19 ga.); electro-gal.(16 ga.); choice of optional decorator colors
- Choice of five Slant/Fins H-Element
-
LC Series
LC Series- Material: 18-gauge galvanized steel
- Heights: 8.5" (one tier) & 14" (two tier)
- Depth: 3 1/2"
- Lengths: 2' to 8'
- Choose from Slant/Fin's 5 H-elements for various output requirements
- Wall brackets and Hangers sold separately
- Finish: Galvanized is standard. Custom color available.
- Lengths from 2' to 8'
- Telescopic cover accessories
-
F Series
F Series- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
-
J Series
J Series- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
