Related products

• 
  

  HD Series

  • Material: 16-ga. steel front cover, 20-ga. back panel
  • Heights: 8-1/2" (one tier) & 14" (two tier)
  • Depth: 3-1/2"
  • Lengths: 2' - 8'
  • Heavy gauge enclosure and support brackets
  • Cover secures together with screws at each bracket location
  • 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
  • 1-1/4" all-steel element, for use in one or two pipe steam systems
  • Factory pre-assembled in individual cartons for rapid installations
  • Finish: Galvanized is standard. Available in baked enamel
  • Custom color available on special order
  • Telescopic cover accessories
  • Accessories have a screw hole to secure accessories to front cover
  • Pan head screws supplied by others
  • The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.

  DETAILS
  HD Series
• 

  The Kicker

  • Application: Hot water
  • Voltage: 120 VAC, 60 Hz.
  • Output: 5075 – 7227 (180 Deg. 1 GPM)
  • Range: 140 - 220 Btuh ˚F
  • High performance manifold-type heat exchanger
  • Two built-in air vent tappings. Coin or screwdriver access.
  • Brazed tube joints resist rigors of installation and years of operation
  • 1/2" hot water supply and return fittings
  • Aluminum turbo fin heat exchanger maximizes heat transfer
  • Expanded copper tube bonds fin to copper for high heat transfer
  • Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
  • Aluminum squirrel cage blower
  • Aquastat permits blower operation only when the water temperature is above 130°F
  • Three-position blower switch is easily accessible
  • Hot dipped galvanized chassis resists rust and corrosion
  • Rubber grommets cushion chassis for quiet operation
  • 22" matte black grille

  DETAILS
  The Kicker
• 
  

  Fine / Line 30

  • Residential Hot Water
  • Output: 580 Btuh/FT (180 deg. 1 GPM)
  • Height: 7-7/8", Depth: 2-11/16" Lengths: 2' - 14'
  • Made in the USA by the leader in baseboard heating
  • Rust-resistent, galvanized steel enclosures with nu-white enamal finish maintains 
beauty
  • Commercial grade material at residential cost
  • Designed for single homes, apartments and renovations
  • Optional swedged element tubes (available in 1/2" or 3/4") facilitate joining sections
  • Industry’s best high strength support brackets & no-noise expansion cradles
  • Accommodates return line with short radius return bend
  • Drawn steel end caps and wall trim provide a distinguished look
  • 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
  • Fully modulating, pivot mounted damper helps control individual room temperatures
  • Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
  • Easy to open zip-strip cartons
  • Shipped fully assembled for fast, easy installation

  DETAILS
  Fine / Line 30
• 
  

  350 Series

  • Application: 19 or 16-ga. steel front cover, 24-ga. back cover
  • Heights: 9-7/8" (one tier)
  • Depth: 3-1/2"
  • Lengths: 2' - 8'
  • Factory pre-assembled in individual cartons for rapid installations
  • Interchangeable heating elements
  • Room control damper optional
  • Double-bent aluminum fins won’t loosen
  • Expansion noises banished
  • Super-strong, dent-proof, kick-proof front panel
  • Stronger tubes for longer service
  • Extra-strength steel brackets
  • Finish: Nu-White (19 ga.); electro-gal.(16 ga.); choice of optional decorator colors
  • Choice of five Slant/Fins H-Element

  DETAILS
  350 Series