- Material: 16 or 14-ga. options
- Heights: 17″ (one tier) 24″ (one or two tier)
- Lengths: 2′ to 8′
- Depth: 5-1/4″
TBG Series is an attractive but rugged wall mounted hydronic radiation. Ideal for use in applications where radiation will be mounted high on the wall, such as in gymnasiums or corridors. Built to withstand use in high abuse areas such as gymnasiums. Extensive selection of decorator colors.
Related products
-
F Series
- Material: 18-ga. cover
- Heights: 4-3/4" (one tier) & 11-3/4" (two tier)
- Depth: 4-3/8"
- Lengths: 2' to 8'
- Rugged Cover Hangs Directly on Heating Element
- Up to 3 Tiers for higher output
- Ideal for use in Industrial Applications
- Decorator Colors Available Upon Request
- Choice of 6 commercial copper or steel elements
-
Multi / Pak 93
- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Lengths: 2' to 8'
- Depth: 3-1/2"
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Decorator colors available on special order.
- Lengths from 2' to 8'
- Elements: 4 copper and 1 steel element option
- Telescopic cover accessories
-
Base / Line 2000
- Residential hot water
- Output: 570 Btuh/FT (180 Deg at 1 GPM)
- Height: 7-3/8", Depth: 2-11/16" Lengths: 2' - 10'
- Made in the USA by the leader in baseboard heating
- Designed for single homes, apartments and renovations
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting, makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
350 Series
- Application: 19 or 16-ga. steel front cover, 24-ga. back cover
- Heights: 9-7/8" (one tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Factory pre-assembled in individual cartons for rapid installations
- Interchangeable heating elements
- Room control damper optional
- Double-bent aluminum fins won’t loosen
- Expansion noises banished
- Super-strong, dent-proof, kick-proof front panel
- Stronger tubes for longer service
- Extra-strength steel brackets
- Finish: Nu-White (19 ga.); electro-gal.(16 ga.); choice of optional decorator colors
- Choice of five Slant/Fins H-Element
- Material: 16 or 14 ga.
- Heights: 17" (one tier) &    24" (two tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Slope Top and Slope Bottom Cover
- Up to 2 tiers for higher output
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
Slant/Fin baseboard provides gentle full room convection heating that blocks chilling drafts at the outside walls. Slant/Fin hot water baseboard heating surrounds your customers with heating comfort. Natural convection perimeter heating blocks chilling drafts at the outside walls where they originate. No annoying on-and-off blowing ducts. No dirt and germs blown through forced air system. Easy to zone for room by room comfort control. Ideal for use with high efficiency boilers.