- Material: Available in 18,16 or 14-gauge front cover
- Heights:9-7/8″ (one tier) 14″ (one tier) 21″ (one or two tier) 28″ (up to three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4″
J Series fin tube enclosures are functional and durable units. J Series is popular for deluxe commercial installations, schools, offices, hospitals, churches and office buildings. The sloping louvered top is attractive and prevents use of the enclosure as a shelf or seat.
Related products
-
Revital/Line
- Fuel: Oil Fired
- System: Hot Water
- Combustion: Atmospheric
- Capacity: 105-231 MBH
- Up to 87.0% AFUE
- For residential to light commercial requirements
- Robust triple pass cast-iron heat exchanger
- Direct Vent model available
- Installer-friendly features
- More BTU's per section than ordinary boilers
- Metal push nipple to connect individual sections
- 25 Year Limited Lifetime Warranty
- The Q3 is DOE 2021 compliant
-
Fine / Line 30
- Residential Hot Water
- Output: 580 Btuh/FT (180 deg. 1 GPM)
- Height: 7-7/8", Depth: 2-11/16" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Rust-resistent, galvanized steel enclosures with nu-white enamal finish maintains beauty
- Commercial grade material at residential cost
- Designed for single homes, apartments and renovations
- Optional swedged element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- Accommodates return line with short radius return bend
- Drawn steel end caps and wall trim provide a distinguished look
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
HD Series
- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
-
TBG Series
- Material: 16 or 14 ga.
- Heights: 17" (one tier) &    24" (two tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Slope Top and Slope Bottom Cover
- Up to 2 tiers for higher output
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
- Material: 18, 16 or 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier), & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- Single-piece cover mounts on wall brackets
- Optional Damper
- Galvanized finish is standard. Baked enamel available.
- Copper with aluminum fins: C-340, C-440, C-540
- Steel with electro-galvanized steel fins: S-532, S-540, S-832
- Connectors align cover sections which butt to one another, providing a near seamless joint
- Uses internal or external splice plate.
- Telescopic accessories
Slant/Fin baseboard provides gentle full room convection heating that blocks chilling drafts at the outside walls. Slant/Fin hot water baseboard heating surrounds your customers with heating comfort. Natural convection perimeter heating blocks chilling drafts at the outside walls where they originate. No annoying on-and-off blowing ducts. No dirt and germs blown through forced air system. Easy to zone for room by room comfort control.
Product Literature
Technical Resources
Install-Guide-J-JR-R-RR-EM-F-TBG-909JA-Series-Dimensional-Data-107Column-Cover-Set-Installation-0407JR-Series-Dimensional-Data-107JA-Series-Valve-Cover-Dimensional-Data-107J-Series-Specifications-112.docS-and-C-Element-Specifications-416.docBare-Element-Submittal-Data-916Specification-Sheet-180Take-Off-Sheet-Excel-616.xls