- Application: Hot water only
- Voltage: 120 VAC, 60 Hz.
- TK-90:0.72 F.L.A., 41 Watts
- TK-70:0.62 F.L.A., 37 Watts
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Capacity: 4437 – 10218
- Range: 140 – 220 Btuh ˚F
When there’s not enough wall space to install baseboard radiation, install The Kicker by Slant/Fin. The compact Kicker provides the heat output of up to 12 feet of baseboard, depending on the model you choose. Sized to fit under cabinets or between wall studs, The Kicker is simple to install and easy to operate. Set it and forget it.
Related products
-
DHWG Boiler
- Fuel: Boiler Supplied
- System: Hot Water Generator
- Capacity: Up to 4 gpm with 120 MBH boiler
- Efficiency: Up to 100%
- Hot water when you need it
- Ideal for small residences
- Heat transfer from boiler to DHW with nearly 100% efficiency
- Maintenance-free brazed plate stainless steel heat exchanger
- Wall Hung, light weight, easy to install
- Reversible - mounts with piping facing left or right
- Taco - 0011 circulator with integral flow check
- Flow switch included
-
Base / Line 2000
- Residential hot water
- Output: 570 Btuh/FT (180 Deg at 1 GPM)
- Height: 7-3/8", Depth: 2-11/16" Lengths: 2' - 10'
- Made in the USA by the leader in baseboard heating
- Designed for single homes, apartments and renovations
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting, makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
HWT Water Heater
- Construction: Carbon Steel With Titanium Liner
- More Efficient Heating
- Capacity: 40 - 120 gal.
- Efficiency: <1 deg. loss/hr
- Long life glazed -titanium glass for added strength and durability
- Extremely low standby loss; saves energy
- Faster recovery. More hot water per hour.
- Carbon steel tank resists rust and corrosion
- 7 year manufacturers warranty
-
Multi / Pak 90
- Material: 18-gauge galvanized steel
- Heights: 14" (one tier) & 21" (two tier)
- Depth: 5 1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
- Application: Hot water
- Voltage: 120 VAC, 60 Hz.
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Range: 140 - 220 Btuh ˚F
- High performance manifold-type heat exchanger
- Two built-in air vent tappings. Coin or screwdriver access.
- Brazed tube joints resist rigors of installation and years of operation
- 1/2" hot water supply and return fittings
- Aluminum turbo fin heat exchanger maximizes heat transfer
- Expanded copper tube bonds fin to copper for high heat transfer
- Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
- Aluminum squirrel cage blower
- Aquastat permits blower operation only when the water temperature is above 130°F
- Three-position blower switch is easily accessible
- Hot dipped galvanized chassis resists rust and corrosion
- Rubber grommets cushion chassis for quiet operation
- 22" matte black grille
The Kicker is generally installed with baseboard or other radiators that make up a heating zone. An aquastat inside The Kicker activates The Kicker’s fan so that it automatically turns on and off, delivering a quiet flow of heat to the room whenever the water in the heating zone is hot. A convenient switch enables the user to set the fan speed at high, low or off. The Kicker may also be installed as a separate zone with its own room thermostat.
The supply water in each of the short loops off the manifold makes just a single pass through the heat exchanger. This provides higher supply water temperature to a greater percentage of the heat exchanger fins than a serpentine coil. Since this configuration helps minimize pressure drop, you can often install The Kicker in the same heating loop with baseboard without diverting tees. That reduces installation costs.