- Material: FS-7: 18, 16 & 14-ga options
FS-14 and FS-21: 16 & 14-ga options - Heights: 11″ (one tier) 18″ (one or two tier) 25″ (up to three tier)
- Lengths: 2′ to 8′
- Depth: 5-1/2″
FS Series is an attractive but rugged floor mounted hydronic radiation. Ideal for use next to walls with floor to ceiling windows. High output perimeter heating delivers maximum comfort while helping to prevent moisture condensing on windows. Extensive selection of decorator colors.
Related products
-
Multi / Pak 80
Multi / Pak 80- Res. and light comm.
- Hot Water or Steam
- 590 to 790 Btuh/FT (180 Deg. 1 GPM)
- Height: 8-7/8", Depth: 3-1/2" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Designed for single homes and renovations and light commercial applications
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 2" floor-to-front cover opening promotes good air circulation for effective convection heating
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
R Series
R Series- Material: 18, 16 & 14 gauge
- Heights: 9-7/8" (one tier), 14" (one tier), 21" (two tier) & 28" (three tier)
- Lengths: 2' to 8'
- Depth: 5-1/4"
- High Output Rugged Flat Top Cover
- Up to 3 tiers for higher output
- Standard with Top Outlet; Front and Top/Front Outlet options
- Aluminum Grill option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 6 commercial copper or steel elements
-
Multi / Pak 93
Multi / Pak 93- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Lengths: 2' to 8'
- Depth: 3-1/2"
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Decorator colors available on special order.
- Lengths from 2' to 8'
- Elements: 4 copper and 1 steel element option
- Telescopic cover accessories
-
The Kicker
The Kicker- Application: Hot water
- Voltage: 120 VAC, 60 Hz.
- Output: 5075 – 7227 (180 Deg. 1 GPM)
- Range: 140 - 220 Btuh ˚F
- High performance manifold-type heat exchanger
- Two built-in air vent tappings. Coin or screwdriver access.
- Brazed tube joints resist rigors of installation and years of operation
- 1/2" hot water supply and return fittings
- Aluminum turbo fin heat exchanger maximizes heat transfer
- Expanded copper tube bonds fin to copper for high heat transfer
- Heavy duty 2-speed blower motor for extended life. Internally cooled. Permanently lubricated.
- Aluminum squirrel cage blower
- Aquastat permits blower operation only when the water temperature is above 130°F
- Three-position blower switch is easily accessible
- Hot dipped galvanized chassis resists rust and corrosion
- Rubber grommets cushion chassis for quiet operation
- 22" matte black grille
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED