- Material: 18-gauge galvanized steel top & front-cover in Nu-White color
- Heights: 14″ (one tier)
21″ (one or two tier) - Lengths: 2' to 8'
- Depth: 5 1/4″
Multi/Pak 90 commercial slope-top baseboard comes painted & packaged with two-piece interlocking top/cover and wall mount brackets. Accessories are telescopic eliminating critical linear and vertical tolerances. All accessories snap into place without screws or other fasteners. Nu-White baked enamel finish is standard. Houses Slant/Fins commercial grade elements. Strong cover with high output, great for use in commercial applications.
Related products
-
Multi / Pak 80
Multi / Pak 80- Res. and light comm.
- Hot Water or Steam
- 590 to 790 Btuh/FT (180 Deg. 1 GPM)
- Height: 8-7/8", Depth: 3-1/2" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Designed for single homes and renovations and light commercial applications
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 2" floor-to-front cover opening promotes good air circulation for effective convection heating
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Multi / Pak 93
Multi / Pak 93- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Lengths: 2' to 8'
- Depth: 3-1/2"
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Decorator colors available on special order.
- Lengths from 2' to 8'
- Elements: 4 copper and 1 steel element option
- Telescopic cover accessories
-
FS Series
FS Series- Material: FS-7: 18/16/14 ga.,
FS-14 & FS-21: 16/14 ga. - Heights: 11" (one tier), 18" (two tier) 25" (three tier)
- Depth: 5-1/2"
- Lengths: 2' to 8'
- Rugged floor mounted top outlet cover
- Up to 3 Tiers for higher output
- Aluminum Grill Option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
- Material: FS-7: 18/16/14 ga.,
-
HD Series
HD Series- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED