- Material: 18-gauge galvanized steel top & front-cover
- Heights: 9-3/4″ (one tier)
16-3/4″ (one or two tier) - Lengths: 2' to 8'
- Depth: 5-1/4″
Multi/Pak 95 comes packaged with two-piece interlocking top/cover and wall mount brackets. Accessories are telescopic eliminating critical linear and vertical tolerances. All accessories snap into place without screws or other fasteners. Nu-White baked enamel finish is standard. Houses Slant/Fins commercial grade elements.
Related products
-
Base / Line 2000
- Residential hot water
- Output: 570 Btuh/FT (180 Deg at 1 GPM)
- Height: 7-3/8", Depth: 2-11/16" Lengths: 2' - 10'
- Made in the USA by the leader in baseboard heating
- Designed for single homes, apartments and renovations
- Neat fitting accessories stay in place to help maintain beautiful appearance
- Optional Flared element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting, makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Multi / Pak 90
- Material: 18-gauge galvanized steel
- Heights: 14" (one tier) & 21" (two tier)
- Depth: 5 1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
-
Fine / Line 30
- Residential Hot Water
- Output: 580 Btuh/FT (180 deg. 1 GPM)
- Height: 7-7/8", Depth: 2-11/16" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Rust-resistent, galvanized steel enclosures with nu-white enamal finish maintains beauty
- Commercial grade material at residential cost
- Designed for single homes, apartments and renovations
- Optional swedged element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- Accommodates return line with short radius return bend
- Drawn steel end caps and wall trim provide a distinguished look
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Revital/Line
- Fuel: Oil Fired
- System: Hot Water
- Combustion: Atmospheric
- Capacity: 105-231 MBH
- Up to 87.0% AFUE
- For residential to light commercial requirements
- Robust triple pass cast-iron heat exchanger
- Direct Vent model available
- Installer-friendly features
- More BTU's per section than ordinary boilers
- Metal push nipple to connect individual sections
- 25 Year Limited Lifetime Warranty
- The Q3 is DOE 2021 compliant
- Material: 18 gauge galvanized steel
- Heights: 9-3/4" (one tier) & 16-3/4" (two tier)
- Depth: 5-1/4"
- Lengths: 2' to 8'
- Factory packaged with brackets and hangers
- Two-piece interlocking top cover/front cover mount on wall brackets
- Damper optional
- Wall brackets and Hangers packaged with complete assembly
- Finish: Nu-White baked enamel is standard. Custom color available on special order.
- Anodized architectural aluminum grille optional.
- Lengths from 2' to 8'
- Elements: 3 copper and 3 steel element options
- Telescopic cover accessories
Slant/Fin baseboard provides gentle full room convection heating that blocks chilling drafts at the outside walls. Slant/Fin hot water baseboard heating surrounds your customers with heating comfort. Natural convection perimeter heating blocks chilling drafts at the outside walls where they originate. No annoying on-and-off blowing ducts. No dirt and germs blown through forced air system. Easy to zone for room by room comfort control. Ideal for use with high efficiency boilers.