- Material: 18-gauge galvanized steel top & front-cover
- Heights: 9-3/4″ (one tier) 16-3/4″ (one or two tier)
- Lengths: 2' to 8'
- Depth: 3-1/2″
Multi/Pak 93 commercial flat-top baseboard comes painted & packaged with two-piece interlocking top/cover and wall mount brackets. Accessories are telescopic eliminating critical linear and vertical tolerances. All accessories snap into place without screws or other fasteners. Nu-White baked enamel finish is standard. Houses Slant/Fins copper and steel “H” elements. Shallow depth makes it ideal for commercial applications that do not require higher output of the Multi/Pak 95 series.
Related products
-
Fine / Line 30
Fine / Line 30- Residential Hot Water
- Output: 580 Btuh/FT (180 deg. 1 GPM)
- Height: 7-7/8", Depth: 2-11/16" Lengths: 2' - 14'
- Made in the USA by the leader in baseboard heating
- Rust-resistent, galvanized steel enclosures with nu-white enamal finish maintains beauty
- Commercial grade material at residential cost
- Designed for single homes, apartments and renovations
- Optional swedged element tubes (available in 1/2" or 3/4") facilitate joining sections
- Industry’s best high strength support brackets & no-noise expansion cradles
- Accommodates return line with short radius return bend
- Drawn steel end caps and wall trim provide a distinguished look
- 1-3/4" floor-to-front cover opening promotes good air circulation for effective convection heating
- Fully modulating, pivot mounted damper helps control individual room temperatures
- Extendable accessories for wall-to-wall fit with no cutting makes a neat installed appearance
- Easy to open zip-strip cartons
- Shipped fully assembled for fast, easy installation
-
Revital/Line
Revital/Line- Fuel: Oil Fired
- System: Hot Water
- Combustion: Atmospheric
- Capacity: 105-231 MBH
- Up to 87.0% AFUE
- For residential to light commercial requirements
- Robust triple pass cast-iron heat exchanger
- Direct Vent model available
- Installer-friendly features
- More BTU's per section than ordinary boilers
- Metal push nipple to connect individual sections
- 25 Year Limited Lifetime Warranty
- The Q3 is DOE 2021 compliant
-
FS Series
FS Series- Material: FS-7: 18/16/14 ga.,
FS-14 & FS-21: 16/14 ga. - Heights: 11" (one tier), 18" (two tier) 25" (three tier)
- Depth: 5-1/2"
- Lengths: 2' to 8'
- Rugged floor mounted top outlet cover
- Up to 3 Tiers for higher output
- Aluminum Grill Option
- Decorator Colors Available Upon Request
- Ideal for use with High Efficiency Boilers
- Choice of 5 commercial copper or steel elements
- Material: FS-7: 18/16/14 ga.,
-
HD Series
HD Series- Material: 16-ga. steel front cover, 20-ga. back panel
- Heights: 8-1/2" (one tier) & 14" (two tier)
- Depth: 3-1/2"
- Lengths: 2' - 8'
- Heavy gauge enclosure and support brackets
- Cover secures together with screws at each bracket location
- 3/4", 1" and 1-1/4" copper/aluminum elements permit higher flow rates, longer series-loop runs and lower pump loads where required
- 1-1/4" all-steel element, for use in one or two pipe steam systems
- Factory pre-assembled in individual cartons for rapid installations
- Finish: Galvanized is standard. Available in baked enamel
- Custom color available on special order
- Telescopic cover accessories
- Accessories have a screw hole to secure accessories to front cover
- Pan head screws supplied by others
- The picture on the right is an HD-850 installation in the Milwaukee Airport baggage claim area. This installation was done years ago. It is installed right by the cart area and receives a lot of abuse. Please note other than some paint damage it is in great shape. Seeing is believing, This is indeed “Tough Stuff” and it would be tough finding a higher abuse area to install it in.
FEATURES
HOW IT 
PRODUCT
HOMEOWNER 
RELATED